Address
6. October, Cairo, Egypt
EM AGRO 40M Mixer – 40,000-L Stainless Steel Vessel
The EM AGRO 40M Mixer project showcases Electro Mechanic’s engineering and fabrication work on a large-capacity vertical stainless-steel vessel. According to the project drawing, the equipment has a specified volume of 40,000 litres, a shell diameter of 2,700 mm, and a shell length of 7,000 mm.
The design documentation specifies stainless steel 316L for the shell, heads, and nozzles, with stainless steel 304 for non-wetted parts. The drawing also documents the vessel’s geometric parameters, support components, connection positions, and fabrication instructions.
1. Project identification
| Field | Extracted information |
|---|---|
| Company | Electro Mechanic |
| Project / equipment reference | EM AGRO 40M MIXER (visible in the drawing viewer title; truncated) |
| Drawing title | CJV-102 Q-1 |
| Drawing number | CJV-EMA-026-a1 |
| Drawing size | A3 |
| Sheet | 1 of 1 |
| Revision | 01 |
| Drawing date | 6 October 2026 |
| Designed by | A. Ladden (as shown: ALADDEN) |
| Volume | 40,000 L |
| Material | 316L |
| Thickness | 5 mm |
| Weight | 4,000 kg |
2. Geometric specifications
Vertical stainless-steel vessel
Dimensions and construction parameters from the drawing
Nominal volume
40,000 L
40 m³
Shell diameter
2,700 mm
2.7 metres
Shell length
7,000 mm
7 metres
Total listed weight
4,000 kg
4 tonnes
| Geometry parameter | Drawing value |
|---|---|
| Shell thickness | 5 mm |
| Shell diameter | 2,700 mm |
| Shell length | 7,000 mm |
| Heads thickness | 5 mm |
| Motor flange | 20 mm |
| Legs plate thickness | 5 mm |
| Base plate thickness | 16 mm |
| Adjustable leg | M39 |
| Lifting lugs thickness | 14 mm |
3. Material specifications
| Component | Material |
|---|---|
| Shell | Stainless steel 316L |
| Heads | Stainless steel 316L |
| Nozzles | Stainless steel 316L |
| Non-wetted parts | Stainless steel 304 |
4. Design and operating conditions
| Parameter | Specified value |
|---|---|
| Design temperature | Room temperature |
| Design pressure | Atmospheric |
| Operating temperature | Room temperature |
| Operating pressure | Atmospheric |
| Test pressure | Atmospheric |
The drawing specifies atmospheric pressure for all three pressure entries. No numerical pressure rating is provided.
5. Visible equipment and drawing features
The engineering drawing depicts the following features:
- Vertical cylindrical vessel with a segmented shell representation.
- Top head with multiple nozzle or connection positions labeled N1 through N5.
- Additional connection or feature labeled N6 in the drawing.
- Four visible support legs with adjustable feet.
- Lifting lugs.
- Motor flange.
- Base plate and vessel support assembly.
These are features visible in the illustration; the drawing excerpt does not establish the exact function, diameter, or connection standard of every nozzle.
6. Workshop and fabrication instructions
The drawing contains the following instructions:
- All dimensions are in millimetres unless otherwise noted.
- The indicated thickness of the heads is the minimum thickness after forming.
- Vertical, circumferential, and horizontal welds in the shell and heads must be full-penetration butt welds.
- Nozzle projections must be measured from the tank centreline unless otherwise specified.
- For shell/conical nozzles, measurements are from the tank/cone centreline; for a flat-head tank, measurements are from the external surface.
- Do not alter the material specification unless approved.
7. Connection schedule information
The visible portion of the drawing contains a unit/type table with these entries:
| Unit | Type |
|---|---|
| mm | standard |
| inch | elbow |
| mm | flange |
| inch | union |
| inch | union |